Throughfeed Heavy Duty Planer Moulder Series Hypermac with 5, 6, 7, 8, 9 or 10 Spindles Hypermac planer moulding machine

Capacities

  • Maximum size of timber admitted width 15 - 230 mm
  • Maximum size of timber admitted thickness 10 - 150 mm

Cutting Circles

  • First bottom head 125 mm minimum 180 mm maximum
  • Vertical spindles 125 mm minimum 232 mm maximum
  • Horizontal spindles 125 mm minimum 225 mm maximum

Feed System

  • Maintenance free full cardan shaft drive to feedworks for balanced drive performance, with individual worm reduction gear box to each feed roller station
  • Feed roller diameter 140 mm
  • Infinitely variable feed speeds with inverter and feed speed LED
  • display 6 – 36 metres per minute
  • Feed motor power 5.5 kw/7.5hp
  • Top infeed rollers before first bottom head with pneumatic rise and fall by switch
  • Steel feed rollers up to top head are hardened and chromed to resist wear and to prevent chips sticking to them
  • Polyurethane feed rollers after top head
  • 1 no full width driven serrated infeed bed roller before first bottom head
  • 1 no full width driven plain bed roller before fence side head
  • 1 no full width driven plain bed roller before first top head
  • 1 no idle roller after first top head
  • 1 no full width driven plain bed roller before second top head
  • 1 no full width driven plain bed roller at outfeed
    All bed rollers are cardan shaft driven
  • Intermediate top driven feed roller station with pneumatic loading for feeding minimum 300 mm length workpieces
  • Pneumatic pressures to feed roller loading with 3 no pressure regulator controls
  • Powered rise and fall to feed beam with 0.55kw/¾ hp motor
  • All feed rollers and pressures move with top beam rise and fall, including safety switches at extreme points
  • Inch forward and reverse to feed with duplicate control at top head position for fast and easy setting

Features

  • Electro magnetically braked motors
  • All spindle motors with Star delta starting system
  • Edge reference straightening system
  • 65 mm high fences
  • Telescopic bedplates between vertical spindles
  • Infeed side pressure unit
  • Double side pressure unit opposite fence side head moving with near side head with pneumatic loading
  • Adjustable side guides after near side head
  • Pad pressure after top head with vertical screw adjustment and mechanical digital readout
  • 2000 mm pre-straightening infeed table with fence each 10 mm adjustment
  • 40 mm diameter spindles belt driven, with spindle speed of 6000 rpm
  • All spindles have horizontal and vertical adjustment, with mechanical digital readouts for fast and accurate setting 
  • Independent manual vertical adjustment to top head
  • High precision spindle units with high speed bearings
  • All bedplates and fences have 0.3mm hardened chrome HRC at 60o
  • Automatic bed lubrication system with timer control
  • Chipbreaker assembly before first and second top head with twin cylinder pneumatic loading
  • One piece heavy duty cast iron main frame with optimum vibration absorption
  • Centralised lubrication system to all main slides
  • Vertical spindles have 80mm vertical adjustment
  • Horizontal spindles have 40mm horizontal adjustment
  • Safety interlock at infeed to prevent feeding oversized material
  • ATS electronic positioning by keypad control and motorised adjustment to near side spindle horizontal movement with dual LED measurement display for tool compensation to give radius and actual cutting sizes (Model REC-705B)                                                                                                    
  • ATS electronic positioning by keypad control and motorised adjustment to first top spindle vertical movement with dual LED measurement display for tool compensation to give radius and actual cutting sizes (Model REC-705B) – additional LED dual readout display Type REC-720 positioned at first top head
  • ATS electronic positioning by keypad control and motorised adjustment to second top spindle vertical movement with dual LED measurement display for tool compensation to give radius and actual cutting sizes (Model REC-705B) – additional LED dual readout display Type REC-720 positioned at second top head

Note:  The REC-720 LED dual readouts are linked together with the main REC-705B controller so that they both read the same whether the spindle is adjusted from the top head position manually or at the infeed controller with motorised adjustment – both top heads move together

  • 1 set (of 6) circular cutterblocks complete with knives
  • Lift up sound and safety enclosure including internal lighting and safety interlocks
  • Interlock to lift up enclosure
  • Dust extraction hoods outlet diameter 150 mm
  • Toolkit
  • Instruction and maintenance manual, electrical diagram and parts list.
  • Machine supplied with electrics arranged 3/50/415 v
  • 1 no. CE Pressure Regulator
  • Machine conforms to CE specification