Throughfeed Heavy Duty Planer Moulder Series Speedmac with 5, 6, 7, 8, 9 or 10 Spindles Speedmac moulding machines

Capacities

  • Maximum size of timber admitted width 20 - 230 mm
  • Maximum size of timber admitted thickness 10 - 150 mm

Cutting Circles

  • First bottom head 125 mm minimum 200 mm maximum
  • Vertical spindles 140 mm minimum 250 mm maximum
  • Horizontal spindles 140 mm minimum 250 mm maximum

Feed System

  • Maintenance free full cardan shaft drive to feedworks for balanced drive performance, with individual worm reduction gear box to each feed roller station
  • Feed roller diameter 140 mm
  • Infinitely variable feed speeds with electronic inverter and feed speed LED display 6 - 60 metres per minute
  • Feed motor power 11 kw / 15 hp
  • Top infeed rollers before first bottom head with pneumatic rise and fall by switch
  • Steel feed rollers up to top head are hardened and chromed to resist wear and to prevent chips sticking to them
  • Polyurethane feed rollers after top head
  • 1 no full width driven serrated infeed bed roller before first bottom head
  • 1 no full width driven plain bed roller before fence side head
  • 1 no full width driven plain bed roller before first top head
  • 1 no idle roller after first top head
  • 1 no full width driven plain bed roller before second top head
  • 1 no full width driven plain bed roller at outfeed
  • All bed rollers are cardan shaft driven
  • Pneumatic pressures to feed roller loading with 3 no pressure regulator controls
  • Powered rise and fall to feed beam with 0.55kw/¾ hp motor
  • All feed rollers and pressures move with top beam rise and fall, including safety switches at extreme points
  • Inch forward and reverse to feed with duplicate control at top head position for fast and easy setting

Features

  • First top infeed roller with internal clutch mechanism.
  • Electro magnetically braked motors
  • All spindle motors with Star delta starting system
  • ATS electronic positioning by keypad control and motorised adjustment to near side spindle horizontal movement with dual LED measurement display for tool compensation to give radius and actual cutting sizes (Model REC-705B)                                                                                                    
  • ATS electronic positioning by keypad control and motorised adjustment to first top spindle vertical movement with dual LED measurement display for tool compensation to give radius and actual cutting sizes (Model REC-705B) – additional LED dual readout display Type REC-720 positioned at first top head
  • ATS electronic positioning by keypad control and motorised adjustment to second top spindle vertical movement with dual LED measurement display for tool compensation to give radius and actual cutting sizes (Model REC-705B) – additional LED dual readout display Type REC-720 positioned at second top head

Note:  The REC-720 LED dual readouts are linked together with the main REC-705B controller so that they both read the same whether the spindle is adjusted from the top head position manually or at the infeed controller with motorised adjustment – both top heads move together

  • Hydro outboard bearing supports to all horizontal spindles
  • 65 mm high fences
  • Telescopic bedplates between vertical spindles
  • Vertical spindles have 80mm vertical adjustment
  • Horizontal spindles have 40mm horizontal adjustment
  • Chipbreaker assembly before first and second top heads with twin cylinder pneumatic loading and mechanical digital readout
  • Infeed side pressure unit before first bottom head with pneumatic loading
  • Near side head chipbreaker pneumatically loaded
  • Double side pressure unit opposite fence side heads moving with near side head with pneumatic loading
  • Adjustable side guides after near side head
  • Pad pressure after first and second top heads with pneumatic loading
  • 800 mm short infeed table with 10 mm adjustment
  • 50 mm diameter spindles belt driven, with spindle speed of 6000 rpm
  • All spindles have horizontal and vertical adjustment, with mechanical digital readouts for fast and accurate setting
  • Independent manual vertical adjustment to top heads
  • High precision spindle units with super high precision high speed bearings
  • All bedplates and fences have 0.3mm hardened chrome HRC at 60o
  • Auto bed lubrication system with timer control feeding to 4 points of table
  • Heavy duty main frame with optimum vibration absorption
  • Centralised lubrication system to all main slides
  • Safety interlock at infeed to prevent feeding oversized material
  • Lift up sound and safety enclosure including internal lighting with safety interlocks
  • Interlock to lift up enclosure
  • Machine equipped with separate main control cabinet with 5 metres of cable 
  • Hydro grease gun
  • Dust extraction hoods outlet diameter 175 mm
  • Toolkit
  • Instruction and maintenance manual, electrical diagram and parts list.
  • Machine supplied with electrics arranged 3/50/415 v
  • 1 no. CE Pressure Regulator
  • Machine conforms to CE specification