LMC 1300
MULTIPLE / Multiple Rip saw
Models are constructed with bottom multiple rip saws
It's a Powerful, Precise, Efficient and Economical Unit in One Small Package.
Typical Application:
Panel boards and laminated lumbers.
OUTSTANDING FEATURES:
- 6 top rollers with pneumatic pressure system for smooth and stable feeding.
- 4 bottom feed rollers for powerful infeed movement.
- The anti-rebound fence located on the infeed ensures operational safety.
- The infeed table is equipped with 1 auxiliary roller and 2 side pressure wheels.
- Hard chromed table for maximum resistance and durability.
- 3 central dust hoods (6’’ each) are used for dust collection.
- Inverter control for infinitely variable feeding speed.
- 75HP powerful saw drive motor is suitable for heavy-duty cutting (100HP opt.)
- Fast feeding speed up to 24m/Min (Optional).
- Ruggedly constructed for maximum rigidity and stability.
- Full safety enclosure with noise reduction.
- Powered elevation of feed rollers for convenient setting.
- The pressure gauges are mounted on the front side for easy adjustment.
- Remote control stand for greater operating experience.
Remote Control Stand
The control panel board is located on a separate stand for greater operating experience.
FEATURES:
Convenient Blade Replacement
The saw blades can be quickly replaced by pulling out the sliding tray.
Hydro Clamping System
The precisely constructed saw mechanism with hydro outboard bearing support ensures perfect straightness on each ripped edge.
HEAVY DUTY GEARBOX & MOTOR
The feed rollers are driven through a combination of universal shafts and gearboxes, ensuring no loss of power transmission. A smooth feeding effect is assured. Heavy duty gearboxes have no backlash and provides powerful and accurate feeding performance.
Hydraulic End Support
All horizontal spindles are supported by hydraulic cutboard at the end to assure outstanding stability during cutting.
POWERED INFEED ROLLER
The smooth initial feeding of the stock is achieved by means of the independently powered top & bottom infeed rolls.
User-friendly PLC Control
The Super Thundermac employs a high performance PLC control combined with a touch sensing screen, allowing the operation to be controlled with ease. The separately mounted control allows for moving to any position for added convenience of operation.
Three-Dimensional Working Drawing
SPECIFICATIONS
STANDARD EQUIPMENT:
| Maximum width of cut | 1300 mm (51”) |
| Maximum thickness of cut | 50 mm |
| Sawblade diameter | Ø10” (12” Opt) |
| Saw arbor diameter | Ø80 mm |
| Feed speed (Infinitely variable) | 6 -15 M/min (24 M/min Opt) (inverted motor) |
| Saw blade speed | 3200 RPM |
| Saw drive motor | 75 HP (100 HP Opt) |
| Feed roller elevation motor | I HP |
| Feed roller drive motor | 7.5HP |
| Net weight | 3800 kgs |
| Gross weight | 4200 kgs |
| Packing dimensions | 3250(L) x 2350(W) x 2100(H) |
* All specifications, dimensions and design characteristics are subject to change without notice.
